06.03
10.2 Machine and setting data
10-280
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
S
Channel-specific machine data
S
Axis-specific machine data
S
Drive machine data.
To parameterize the display filter of a machine data area, use the vertical soft
key Display Options... in the appropriate machine data area.
Example:
Display filter for channel machine data
Operating area: Start-up –> Machine Data –> Channel MD –> Display Options...
Note
The parameter: Display Filter of the corresponding machine data description
indicates to which display group a machine data item belongs to.
References: /LIS/
Lists
A display group contains machine data within a machine data area which be-
long to the same topic.
By selecting/deselecting the display groups, the number of displayed machine
data of the current machine data area increases or decreases.
If the Expert mode display filter is disabled, only the machine data of a machine
data range are displayed which are required for the basic functionality of the
NC.
The index filter refers to the machine data fields. On the display, these machine
data can be identified by the field index attached to the machine data string.
Example: 10000 AXCONF_MACHAX_NAME_TAB[index]
If the index filter is activated, machine data fields are only displayed in the
specified index area.
Display filter
Display groups
Expert mode
Index from
to
10 NC Start-Up with HMI Advanced
