manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

01.91

5  Configuring

5.20  FB 197  Load tool list (turning version)

5.20

FB 197 WZ-LISTE

Load tool list (turning version)
for SINUMERIK 880/880 GA2 and package 2 only

Description

All tools required for a machining cycle should be available in a tool turret. If this is not possi-
ble, tools have to be inserted (reloading) from the background magazine into the active maga-
zine during machining of a workpiece. In order to enable automatic processing of these
functions, the order in which the tools are required in a machining cycle must be specified in a
leader of the part program.

The "Load tool list" FB realizes the entry of all data stored in the leader of the part program in-
to DBs. The T number and the H word, which are included in the leader, are required by the
PLC. The H word states the turret location where the tool is to be inserted. If no H word is
specified, locator number "0" is entered into the tool list. The specification of the extended H
address is insignificant. The user has to make sure that the specification of the locator number
is correct. No check is made whether the location is within the magazine limits.

Even if a tool is used several times during a machining cycle, its tool number occurs in the lea-
der only once. If the user wants to assign additional tools (replacement tools) to the turret, the
T number and the respective locator number for each replacement tool have to be listed in in
the leader.

The "Load tool list" FB is started and terminated by means of the H function. The number of
the part program initiated is read out beginning at the start. Then a check is made whether this
number is already entered for the initiated part program in the tool list (DBVS). If this is not the
case, the tool list is first deleted and then both the program number and the leader data of the
pending part program are stored. If the leader data are already available in the PLC, the leader
is skipped.

The value of an R parameter determines whether the leader is skipped. The leader is skipped
if an R parameter is loaded with the value "0" in the NC part program. Depending on whether
the tool list is loaded in the PLC, the value of the R parameter is modified by the "Load tool
list" FB. The leader is not loaded if the result of scanning the R parameter = 0. The R para-
meter must be scanned in the part program.

On activation of the "Load tools" FB, a read disable is issued which must be assigned to the
channel where the part program is running.

Note:

During loading of the tool list, the "Suppress routing" bit (D 63.15) must be set for the corre-
sponding channel so that tool selection does not declare a replacement tool as the active tool.

Status identifications can be used to check whether the complete tool list was loaded. The sta-
tus signal is entered in DW 0 of the 2nd DB of the tool list (DBVS+1):

Status signal

Description

AAAA

Complete tool list loaded.

FFFF

Loading of the tool list was aborted (e.g. by reset,
error).

00FF

The tool list is being loaded.

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

5–85

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

Net Optics OM3131-GIG-R Installation Manual preview
OM3131-GIG-R
Brand: Net Optics Pages: 15
National Instruments GPIB-RS232 Installation Manual preview
GPIB-RS232
Brand: National Instruments Pages: 4
SunSynk FSPKL2N User Manual preview
FSPKL2N
Brand: SunSynk Pages: 10
Sime NATURAL 300/8.16 S Installation And Servicing Instruction preview
NATURAL 300/8.16 S
Brand: Sime Pages: 56
Milexia OU Flex 027 Operation Manual preview
OU Flex 027
Brand: Milexia Pages: 17
Zamp Solar ZS-30AD User Manual preview
ZS-30AD
Brand: Zamp Solar Pages: 9
Lika HMC59 Quick Start Manual preview
HMC59
Brand: Lika Pages: 2
ZOMEWORKS Track Rack F Series Troubleshooting preview
Track Rack F Series
Brand: ZOMEWORKS Pages: 2
Lambda LS1291P User Manual preview
LS1291P
Brand: Lambda Pages: 47
Ross GearLite FDB-9649-LC User Manual preview
GearLite FDB-9649-LC
Brand: Ross Pages: 22
Velleman vasmon3 User Manual preview
vasmon3
Brand: Velleman Pages: 11
Sonos LOUDSPEAKER SP100 Setup Manual preview
LOUDSPEAKER SP100
Brand: Sonos Pages: 46
DGFLOW STEADYPRES M/M 11 Operator And Maintenance Manual preview
STEADYPRES M/M 11
Brand: DGFLOW Pages: 47
InfluxGreen IGSI - 3 Series Installation And Operation Manual preview
IGSI - 3 Series
Brand: InfluxGreen Pages: 37
Federal Signal Corporation SS2000 Plus Installation And Operation Manual preview
SS2000 Plus
Brand: Federal Signal Corporation Pages: 56
Black Box IC832A Installation Manual preview
IC832A
Brand: Black Box Pages: 4
Asus Essence 3 User Manual preview
Essence 3
Brand: Asus Pages: 18
Asus Essence One Series User Manual preview
Essence One Series
Brand: Asus Pages: 32

Brands by name

Popular brands

Load more brands