Siemens SINUMERIK 880 Planning Manual Download | Manualshive

Page: 231 / 375

background image

01.91

9 Examples

9.2.5 FB 165 Display exchange list, missing tools, tool list

9.2.5

FB 165 ANZ-LST

Display exchange list, missing tools, tool list

Description

The block refers to the example given in package 2 (SINUMERIK 880/880 GA2 only).

The function block updates the data listed in the display selected (exchange list, missing tools,
tool list).

FB 165 checks whether the data blocks "Exchange list", "List of missing tools" and "Tool list"
are available; their numbers must first be stored as machine data by the user.

The block selects the DB No., depending on the softkey selected, from the MD data and
stores them; this is necessary for the multi-cycle operation of the FB in the DB status word
(DBZW).

At the first block call, the FB transfers the current data from the relevant list into the selection
buffer (DB 183 to DB 185).

The block constantly checks the write/read pointer of the list and transfers the current data of
the list to the selection buffer in case of a change of the pointers.

The block remains ready until the selected display is exited via a "recall".

Block data

Lib. No.

: 10051

FBs to be loaded

: None

DBs to be loaded

: None

Type of FB call

: Unconditional in FB 160

Block call FB 165

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

FB ANZ-LST

DB 145

DB 40

DW 118

ZW

FEHL

DW 50

Signal descriptions

ZW

DB 145, DW 118:

Status words for internal states

FEHL

The cause of the error is stored as the number of an interactive text in DB 40,
DW 50:

DB 40, DW 50:

30: DB tool list missing
31: DB exchange list is missing

© Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1

9–59

SINUMERIK 840/880 (PJ)

«
...
229
230
231
232
233
...
»

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

Brand: S.M.S.L Pages: 16

Brand: V-TAC Pages: 3

Brand: Yamaha Pages: 31

MAXX SST VEC054D

Brand: Vector Pages: 44

Brand: T+A Elektroakustik Pages: 60

Brand: Sonnen Pages: 5

SinePower MSI924

Brand: Waeco Pages: 436

Q.HOME+ ESS HYB-G2

Brand: Q CELLS Pages: 60

Brand: Vicruns Pages: 212

Evershine TLC4000

Brand: Zeversolar Pages: 74

Brand: DigiTech Pages: 4

Brand: GoMax Electronics Pages: 16

Brand: Phrontier Technologies Pages: 16

Brand: M-system Pages: 2

Brand: Zapi Pages: 86

Brand: OXO Pages: 16

Brand: ELCART Pages: 2

Brand: ABB Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands