manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

9  Examples

01.91

9.2.6  FB 166  Load spindle

9.2.6

FB 166 BELA-SP

Load spindle

Description

FB 166 sets the bit "Function flag" = manual loading

The block searches for an empty location for the new tool of the spindle in the magazine to be
loaded and reserves the empty location found for the tool change. Then the "D 117.1" bit is
set at the "Acknowledge spindle" interface.

The spindle can be loaded by operating the "Acknowledge" key.

If the "Abort" key is pressed, the empty location found is enabled again.

If no empty location is found, a corresponding message is displayed on the screen and the
"D 117.1" bit is not set. The "Acknowledge spindle" function is interlocked via the bit of the
interface.

In the first cycle, the block checks whether the spindle is already occupied and whether the
tool size entered is valid.

If the scan is negative, a corresponding message is output on the screen and the call of the
submenu display disabled.

Block data

Lib. No.

: 10051

FBs to be loaded

: FB 112, FB 122, FB 131, FB 132, FB 152, FB 166

DBs to be loaded

: None

Type of FB call

: Conditional in FB 160

DBs to be input

: None

Error messages

: 08: Spindle reserved

15: No empty location found
16: Invalid tool size

Block call FB 166

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

FB BELA-SP

DB 145, DW 112

ZW

FEHL

DB 146, DW 7

FEHL

DB 40, DW 50

Signal descriptions

FEHL

The cause of the error is stored as the number of a user text in DB 146, DW 7; and
as the number of an interactive text in DB 40, DW 50:

DB146, DW 7:

15: No empty location found
16: Invalid tool size

DB 40, DW 50:

28: Spindle reserved

ZW

DB 145, DW 112:

Status words for internal statuses

9–62

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

TDT RV2 Manual preview
RV2
Brand: TDT Pages: 18
GE HOME NERATOR SYSTEM 18000 WATT Installation And Start-Up Manual preview
HOME NERATOR SYSTEM 18000 WATT
Brand: GE Pages: 84
Snell & Wilcox HD5050 Operator'S Manual preview
HD5050
Brand: Snell & Wilcox Pages: 51
xpr WS4-CONV User Manual preview
WS4-CONV
Brand: xpr Pages: 12
Statpower PROwatt 1500 Owner'S Manual preview
PROwatt 1500
Brand: Statpower Pages: 28
Baer Interface Module XC Modbus User Manual preview
Interface Module XC Modbus
Brand: Baer Pages: 10
Wacker Neuson FUE 6 Operator'S Manual preview
FUE 6
Brand: Wacker Neuson Pages: 36
CYP CPLUS-V2PEL Operation Manual preview
CPLUS-V2PEL
Brand: CYP Pages: 38
Vicon VI-DSP-2 Setup And Installation Manual preview
VI-DSP-2
Brand: Vicon Pages: 18
Vacon OPTC4 User Manual preview
OPTC4
Brand: Vacon Pages: 32
Benchmark DAC1 PRE Instruction Manual preview
DAC1 PRE
Brand: Benchmark Pages: 51
V2 RXP4 Manual preview
RXP4
Brand: V2 Pages: 4
Blackmagicdesign Teranex Mini IP Video 12G Installation And Operation Manual preview
Teranex Mini IP Video 12G
Brand: Blackmagicdesign Pages: 22
BZB Gear BG-CAP-HA User Manual preview
BG-CAP-HA
Brand: BZB Gear Pages: 22
Parasound D/AC-2000 Owner'S Manual preview
D/AC-2000
Brand: Parasound Pages: 7
Logicform NV1 User Manual preview
NV1
Brand: Logicform Pages: 5
Hagstrom KE24 User Manual preview
KE24
Brand: Hagstrom Pages: 32
Lindy 38164 User Manual preview
38164
Brand: Lindy Pages: 12

Brands by name

Popular brands

Load more brands