manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

9  Examples

01.91

9.2.18  FB 179  Tools selected according to cursor position

9.2.18 FB 179 WZ-CURSR

Tools selected according to cursor position

Description

The FB 172 initializes the "Selected tools" display with the display parameters of the tool
selected via the cursor position. The block first deletes the selection buffer, then selects the
tools according to the cursor position and copies them into the selection buffer. The following
criteria are available:

ID number, tools whose prewarning limit is reached, tool size, occupied locations.

The block requires the selection buffers DB 183 to DB 189 (length: 50 words) that are created
by the FB 161 at a restart. The block at first searches the buffer and afterwards all chained
magazines starting from the magazine to be loaded.

The following message appears if more than 50 tools have been found: "Selection buffer full!".

In case of an error, a user-specific text is output together with the corresponding error
message.

Block data

Lib. No.

: 10050

FBs to be loaded

: FB 111, FB 132, FB 164, FB 179

DBs to be loaded

: None

Type of FB call

: Conditional in FB 160

DBs to be input

: DB 183, DB 184, DB 185, DB 186, DB 187, DB 188, DB 189

Error messages

: 01: No tool found

02: Magazine not available
03: Illegal criterion
11: Selection buffer full!

Block call FB 179

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

FB  WZ-CURSR

DB 145, DW 95

ZW

FEHL

DB 146, DW 7

Signal descriptions

FEHL

The cause of the error is stored as the number of a user text in DB 146, DW 97:

DB 146, DW 7:

01: No tool found
02: Magazine not available
03: Illegal criterion
11: Selection buffer full!

ZW

DB 145, DW 95:

Status words for internal statuses

9–98

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

ultimatte 9 Operating Manual preview
9
Brand: ultimatte Pages: 125
3One data 3011 Manual preview
3011
Brand: 3One data Pages: 9
Camoga C 420 Instruction Manual preview
C 420
Brand: Camoga Pages: 43
YASKAWA CR700 Quick Start Manual preview
CR700
Brand: YASKAWA Pages: 128
Vacon NXL Mounting Instructions preview
NXL
Brand: Vacon Pages: 6
Velleman HDMI2VGA User Manual preview
HDMI2VGA
Brand: Velleman Pages: 28
D-Link 100BASE-FX User Manual preview
100BASE-FX
Brand: D-Link Pages: 6
Icy Box IB-CVB513 Quick Installation Manual preview
IB-CVB513
Brand: Icy Box Pages: 2
Magtek MT-95 Installation And Operation Manual preview
MT-95
Brand: Magtek Pages: 54
Extron electronics Scan Converter VSC 500 Specifications preview
Scan Converter VSC 500
Brand: Extron electronics Pages: 2
Blackmagicdesign Teranex Mini IP Video 12G Installation And Operation Manual preview
Teranex Mini IP Video 12G
Brand: Blackmagicdesign Pages: 22
Raymarine E70196 Installation Instructions Manual preview
E70196
Brand: Raymarine Pages: 42
Barco NGS-D220 Quick Start Manual preview
NGS-D220
Brand: Barco Pages: 2
tbs electronics powersine 200-12 Owner'S Manual preview
powersine 200-12
Brand: tbs electronics Pages: 57
San Telequip SC12 FS SHI User Manual preview
SC12 FS SHI
Brand: San Telequip Pages: 4
CyberPower CPS1000AI User Manual preview
CPS1000AI
Brand: CyberPower Pages: 2
Satel USB-RS Quick Start Manual preview
USB-RS
Brand: Satel Pages: 2
e+p UHD 14 Manual preview
UHD 14
Brand: e+p Pages: 2

Brands by name

Popular brands

Load more brands