manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

9  Examples

11.92

9.2.26  FB 188  Reactivate tool

9.2.26 FB 188 WZ-REAKT

Reactivate tool

Description

The block sets the remaining number of workpieces to the specified number of workpieces for
the tool selected in the display menu, deletes the wear, resets the "Prewarning limit reached"
and "Tool disabled" status bits and sets the "Replacement tool" bit. These functions are
carried out for all D numbers entered into the reference DBs of a location.

Block data

Lib. No.

: 10050

FBs to be loaded

: FB 132, FB 188

DBs to be loaded

: None

Type of FB call

: Conditional in FB 160

DBs to be input

: None

Error messages

: 01: Magazine not available

18: Location not available

Block call FB 188

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

FB WZ-REAKT

DB 146, DW 64

MANR

FEHL

DB 145, DL 72

DB 146, DW 65

PLNR

ZBIT

DB 145, DR 72...DW 71

DB 150, DR 97

RDAN

DB 150, DL 97

RDB1

Signal descriptions

MANR

Magazine number

PLNR

Locator number

RDAN

Number of reference DBs

RDB1

Number of the first reference DB

FEHL

Error bits:

D 72.8...D 72.12:

Error in interface bytes FB 61/62

D 72.13:

Magazine not available

D 72.14:

Location not available

ZBIT

Internal status bits

Block structure

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Network 1

* * * * * * * * * *

–

Flag processing: Set dynamic flag.
Save flag.

9–128

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

Yamaha UX16 Owner'S Manual preview
UX16
Brand: Yamaha Pages: 31
xpr WS4-CONV User Manual preview
WS4-CONV
Brand: xpr Pages: 12
Statpower PROwatt 1500 Owner'S Manual preview
PROwatt 1500
Brand: Statpower Pages: 28
Baer Interface Module XC Modbus User Manual preview
Interface Module XC Modbus
Brand: Baer Pages: 10
Balluff BML-S1G0-B7 Series Condensed Manual preview
BML-S1G0-B7 Series
Brand: Balluff Pages: 20
National Instruments GPIB-RS232 Installation Manual preview
GPIB-RS232
Brand: National Instruments Pages: 4
SunSynk FSPKL2N User Manual preview
FSPKL2N
Brand: SunSynk Pages: 10
Racal Instruments RA-137 Manual preview
RA-137
Brand: Racal Instruments Pages: 12
Nexen EN40-IS User Manual preview
EN40-IS
Brand: Nexen Pages: 13
Votek UT-6301 User Manual preview
UT-6301
Brand: Votek Pages: 33
Nibe SOLAR FP215 P Installer Manual preview
SOLAR FP215 P
Brand: Nibe Pages: 76
Aegis 4KPROIP Series User Manual preview
4KPROIP Series
Brand: Aegis Pages: 20
Parallax TSL235R Manual preview
TSL235R
Brand: Parallax Pages: 3
Caen ELS PreDAC User Manual preview
PreDAC
Brand: Caen ELS Pages: 52
AIMS Power PWRI300012S Instruction Manual preview
PWRI300012S
Brand: AIMS Power Pages: 10
Moxa Technologies NPort 5610-16 Quick Installation Manual preview
NPort 5610-16
Brand: Moxa Technologies Pages: 2
Planet GT-902 User Manual preview
GT-902
Brand: Planet Pages: 63
ZCS AZZYRRO 3-6-ZSS-HP Quick Manual preview
AZZYRRO 3-6-ZSS-HP
Brand: ZCS Pages: 65

Brands by name

Popular brands

Load more brands