manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

9  Examples

01.91

9.2.30  FB 192  Terminate tape

9.2.30 FB 192 A-LOCHST

Terminate tape

Description

The function block does not start while the data distributor is making an entry in the loading
line; otherwise, an error message is output (DB 146, D 2.7 "Data distributor running").

The user has two options for terminating "Loading via tape":

Terminate tape

All tools specified on the tape are already loaded, the tape has finished and the loading line
contains no tool data.

Since this state is not known to the function block, it deletes the loading line unnecessarily,
declares all D numbers of the reference list unassigned, with the exception of one deleted D
number, and acknowledges the data distributor negatively. Since the "Tape" function block FB
155 has already terminated the data distributor by that time, the negative acknowledgement is
not evaluated.

The "Loading via tape" is terminated without error (not aborted)!

Abort tape

Not all tools have yet been loaded via tape. The function block deletes the loading line,
declares all D numbers of the reference list unassigned, with the exception of one deleted D
number, and enters a negative acknowledgement for the data distributor. The data distributor
evaluates this negative acknowledgement and aborts the "Tape" function block FB 155 with an
error message.

If a tool was entered in the loading line at the time of the abort ("End tape" softkey), this tool
will not be loaded.

"Loading via tape" is aborted (not terminated without error)!

Special features:

•

User acknowledgement

The dynamic softkey signal (F 238.1) must be assigned by the user program either to the
positive user acknowledgement (F 241.1) or to the negative user acknowledgement
(F 240.1) within the same cycle. The user acknowledgement may be present for only one
cycle (by logic operation with the dynamic softkey signal).

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

DW 146

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

X

X

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

FY 238

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

FY 239

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

dynamic

a a a a a a a a a a a a a

a a a a a a a a a a a a a

a a a a a a a a a a a a a

a a a a a a a a a a a a a

a a a a a a a a a a a a a

static

a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a

Softkey signals

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

DB 146:

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a

DW 147

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

X

X

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

FY 240

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

a a a a a a a a a a a a

FY 241

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a

negative

a a a a a a a a a a a a a a

a a a a a a a a a a a a a a

a a a a a a a a a a a a a a

a a a a a a a a a a a a a a

a a a a a a a a a a a a a a

positive

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

User acknowledgements

9–142

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

ABB ACS355 series Manual preview
ACS355 series
Brand: ABB Pages: 78
Mitsubishi FR-A7NC Instruction Manual preview
FR-A7NC
Brand: Mitsubishi Pages: 106
ScienTECH DB15 Operating Manual preview
DB15
Brand: ScienTECH Pages: 12
Allnet ALL-USB-RS422/485 User Manual preview
ALL-USB-RS422/485
Brand: Allnet Pages: 6
B&B Electronics McPC-Gigabit Operation Manual preview
McPC-Gigabit
Brand: B&B Electronics Pages: 5
Teleste EASI ATM IND2x2 Series User Manual preview
EASI ATM IND2x2 Series
Brand: Teleste Pages: 28
Samlexpower PST-1000-12 Owner'S Manual preview
PST-1000-12
Brand: Samlexpower Pages: 60
Matrix D-PG 1000 Original Instructions Manual preview
D-PG 1000
Brand: Matrix Pages: 55
Baumer Hubner Berlin POG 86 Mounting And Operating Instructions preview
Hubner Berlin POG 86
Brand: Baumer Pages: 36
Sollae Systems CSE-H53N User Manual preview
CSE-H53N
Brand: Sollae Systems Pages: 70
Audio Authority Kit 41 Installing And Using preview
Kit 41
Brand: Audio Authority Pages: 2
Jarol JAC200 Series User Manual preview
JAC200 Series
Brand: Jarol Pages: 174
Carrier TRANSICOLD 69UG15 Series Operation And Service preview
TRANSICOLD 69UG15 Series
Brand: Carrier Pages: 60
DCCconcepts Cobalt Alpha Series Manual preview
Cobalt Alpha Series
Brand: DCCconcepts Pages: 25
Wen 56105 Manual preview
56105
Brand: Wen Pages: 28
CYP SY-P290 Operation Manual preview
SY-P290
Brand: CYP Pages: 16
LG LG390N3K-V6 Installation Manual preview
LG390N3K-V6
Brand: LG Pages: 18
LG LG425N2T-E6 Installation Manual preview
LG425N2T-E6
Brand: LG Pages: 18

Brands by name

Popular brands

Load more brands