manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

10  Data fields

11.92

10.2.3  PLC machine data bits

"0" signal:

With regard to the tool identifications, only identification bits 0 to 7 are assigned to
the low-order byte of identification DB 152. The loading of user data is not
supported by the software. Identification bits 8 to 15 of the high-order byte of 
DB 152 can additionally be modified via R21 in the extended R parameter format
(see documentation on FB 155).

Bit 4

Selection "Loading with operator guidance via tape"

"1" signal:

For loading with operator guidance via tape, the data are first entered into the
loading line of the magazine table (data word 2 in the operating example). Any
specifications of magazine and locator No. are ignored. An empty location is
searched for the tool which is to be loaded, and provided for the user program at
the interface for loading with operator guidance (DB 146, DWs 1 to 5). After
positioning of the determined empty location on the loading point, the operator can
load the tool to be loaded in the loading point. By means of a positive
acknowledgement in the loading display, the tool data are transferred from the
loading line to the loading point.

"0" signal:

The tool data are entered in the magazine location specified in the block.
"Reloading" is activated if magazine location = 0. Reloading into the tool buffer
(magazine number = 0) is rejected with an error message.

Bit 3

Reserve tool for application

"1" signal:

Tools (active or replacement tools) which are found in the background magazine
are reserved for one of the following applications (DB 151, bit 14). During a further
search for a tool with the same identification number, the tool reserved previously
can no longer be found (cf. description of FB 128, TRANSFER).

"0" signal:

The bit in DB 151 is not set.

Bit 2

D No. 

 

 R parameter via user command (only turret)

"1" signal:

The D numbers of the tool found are not immediately provided via "Tool found"
but only via user command bit 5 (cf. "Magazine not equal to turret").

"0" signal:

The D numbers are provided immediately after the tool search.

Bit 1

Provide D numbers for magazine = turret

"1" signal:

For magazines which are turrets, the D numbers are transferred to the R
parameters R 101 to R 109 of the current NC channel immediately after the tool
search of the basic functions. The machine data bit is inactive for magazines
which are not a turret.

Restriction: The tool must inserted be in the assigned magazine. If the tool is
found in one of the chained magazines or in the tool buffer, the D number can be
provided via FB 135 (Provide D numbers) by the machine program.

"0" signal:

No D numbers are provided in the R parameters R 101 to R 109 for magazines
equal to turret via the base function. The D numbers must be provided by the
machine program via FB 135.

10–22

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

EAS Electric EINSOLAR5V Quick Installation Manual preview
EINSOLAR5V
Brand: EAS Electric Pages: 4
EAS Electric EINSOLAR5Y Owners And Installation Manual preview
EINSOLAR5Y
Brand: EAS Electric Pages: 31
ICP DAS USA tM-752N Series Quick Start Manual preview
tM-752N Series
Brand: ICP DAS USA Pages: 7
Sonoro QUBO SO-220 Operating Manual preview
QUBO SO-220
Brand: Sonoro Pages: 148
VOLTCRAFT SPA-5 Operating Instructions Manual preview
SPA-5
Brand: VOLTCRAFT Pages: 10
YASKAWA CIMR-XC2 Series Instruction Manual preview
CIMR-XC2 Series
Brand: YASKAWA Pages: 77
Avermedia AVerKey550 User Manual preview
AVerKey550
Brand: Avermedia Pages: 38
Pro-Ject Audio Systems DAC Box E Instructions For Use preview
DAC Box E
Brand: Pro-Ject Audio Systems Pages: 3
ICP DAS USA I-7520AR Quick Start Manual preview
I-7520AR
Brand: ICP DAS USA Pages: 2
Samlexpower SA-1000K Series User Manual preview
SA-1000K Series
Brand: Samlexpower Pages: 23
Lindy 70408 User Manual preview
70408
Brand: Lindy Pages: 8
TaKo Electronics EBi Direct Interpolation DAC User Manual preview
EBi Direct Interpolation DAC
Brand: TaKo Electronics Pages: 7
Channel Vision B-204 Instructions preview
B-204
Brand: Channel Vision Pages: 2
Datavideo DAC-7 Instruction Manual preview
DAC-7
Brand: Datavideo Pages: 8
Kramer VP-426 User Manual preview
VP-426
Brand: Kramer Pages: 20
Clarke 3400900 Operating & Maintenance Instructions preview
3400900
Brand: Clarke Pages: 12
Hoymiles HM-300NT User Manual preview
HM-300NT
Brand: Hoymiles Pages: 29
Ubiquiti INS-3AF-I-G Quick Start Manual preview
INS-3AF-I-G
Brand: Ubiquiti Pages: 16

Brands by name

Popular brands

Load more brands