manualshive.com logo in svg

Siemens SINUMERIK 880, Planning Manual

The Siemens SINUMERIK 880 is a cutting-edge industrial control system, empowering precision machining processes. Unlock its full potential by accessing the user manual, available for free download on our website. Seamlessly navigate through comprehensive instructions and optimize productivity to ensure smooth and efficient operations.

Share
Download
background image

5  Configuration

11.92

5.3  FB 112  Search for empty location without presetting

SURI

Search direction
In this parameter, the direction in which the magazine(s) and the locations selected
are searched is to be specified. The search directions ”Forwards” and ”Backwards”
are available. If the search direction is defined incorrectly or not at all (e.g. 
"SURI"='   ') the search direction "Forwards" is defined internally.
Permissible search directions =

'V' : Forwards
'R' : Backwards
'S' : Symmetrical

IPOS

Actual position
(Override prefix for the actual position in the submagazine-specific user interface.)
Specification of the current actual position of the magazine where the search starts.
The actual position is evaluated only in the case of linear magazines. The block then
evaluates the submagazine- specific machine data bit 11, DB 64 (see Section 2.1.2).
The actual position is expected in parameter "IPOS". If the parameter is not defined,
i.e. "IPOS" = 0, data word DW 76 of the submagazine-specific user interface of the
current channel DB (DB 10 to DB 25) is evaluated. In both cases, the actual position
must be within the magazine limits. If the actual position is outside the magazine
limits, the middle of the magazine is defined as the actual position.

PRGK

Number of the internal program channel active in the current search operation
When a search operation is called for the first time, this parameter must be cleared.
The allocation of the program channel is carried out by FB 111 itself and must be
provided by the user for all other FB calls, with respect to the current search
operation.

MANR

Magazine number
This parameter specifies the magazine where the empty location(s) was/were found.

PLNR

Locator number
This parameter specifies the locator No. of the empty location found for the required
tool size in the magazine "MANR".

GEF

Found
If an empty location has been found for the required tool size within the specified
search area, the GEF parameter has a "1" signal for the duration of one PLC cycle.
(For unconditional processing only; in the case of a conditional call, the signal
remains in the "1" state until the next search job is initiated).

SUVL

Search operation active
The SUVL parameter has a "1" signal as long as the search operation is active.

F

Error
The parameter has a "1" signal for the duration of one cycle if an error has been
found during initialization of the block. (For unconditional processing only; in the case
of a conditional call, the signal remains in the "1" state until the next search job is
initiated.)

NGEF

Not found
If the search key has not been found, the parameter NGEF has a "1" signal for the
duration of one PLC cycle. (For unconditional processing only; in the case of a
conditional call, the signal remains in the "1" state until the next search job is
initiated.

IST

Actual position of the submagazine-specific user interface 
(DW 76, DB 10...DB 25) (see parameter "IPOS")

5–10

© Siemens AG  1991  All Rights Reserved      6FC5 197-0AA40-1BP1

SINUMERIK 840/880 (PJ)

Summary of Contents for SINUMERIK 880
























































































































































































































































































































































































Reviews:

No comments

Related manuals for SINUMERIK 880

Patton electronics 2013 User Manual preview
2013
Brand: Patton electronics Pages: 3
HQ HQ-INV4000-12 Manual preview
HQ-INV4000-12
Brand: HQ Pages: 76
R&S SZU100A Manual preview
SZU100A
Brand: R&S Pages: 40
Fema I4 Series Manual preview
I4 Series
Brand: Fema Pages: 28
Thinkpower S3600TL User Manual preview
S3600TL
Brand: Thinkpower Pages: 30
Oase Solarsafe 17 Operating Instructions Manual preview
Solarsafe 17
Brand: Oase Pages: 9
Clearline V210 Manual preview
V210
Brand: Clearline Pages: 4
Microchip Technology MCP3422 Manual preview
MCP3422
Brand: Microchip Technology Pages: 56
Power Fist 8940835 Manual preview
8940835
Brand: Power Fist Pages: 18
Optical Systems OSD2052P Operator'S Manual preview
OSD2052P
Brand: Optical Systems Pages: 2
Planet VC-201 User Manual preview
VC-201
Brand: Planet Pages: 32
Feig Electronic OBID i-scan ID ISC.ANT.PS-A Mounting Instructions preview
OBID i-scan ID ISC.ANT.PS-A
Brand: Feig Electronic Pages: 28
Icy Box IB-SPL1029AC Manual preview
IB-SPL1029AC
Brand: Icy Box Pages: 30
Millennia AD-596 User Manual preview
AD-596
Brand: Millennia Pages: 2
foxunhd FX-SDH1 Operating Instructions preview
FX-SDH1
Brand: foxunhd Pages: 5
CanadianSolar CSI-75K-T40001-E Quick Installation Manual preview
CSI-75K-T40001-E
Brand: CanadianSolar Pages: 19
Kingrex UC192 User Manual preview
UC192
Brand: Kingrex Pages: 23
Xerox FIB1-SERIAL Specification Sheet preview
FIB1-SERIAL
Brand: Xerox Pages: 2

Brands by name

Popular brands

Load more brands