Installing the optional modules
5.5 Mechanical limit switch module
SIPART PS2 with PROFIBUS communication
66
Operating Instructions, 09/2007, A5E00127926-07
Note
The actuating discs are relatively difficult to move. This design prevents their
unintentional movement during operation. You can achieve an easier and finer
adjustment by reducing friction temporarily. Move the actuator to and fro while
simultaneously holding the actuating discs.
5.5
Mechanical limit switch module
5.5.1
Installing the mechanical limit switch module
WARNING
Zones 2 and 22
The mechanical limit switch module may not be used in zones 2 and 22.
Function
This module is used to report two limits. These limits are reported using galvanic switch
contacts.
Device features
Figure 5-6
Mechanical limit switch module
