Service and maintenance
12.5 Replacing a power output module (POM)
SIPLUS HCS4200 PROFINET/PROFIBUS DP
200
Operating Instructions, 07/2019, A5E35066204A/006
Dismantling the POM (busbar mounting)
Figure 12-7 Dismantling the POM
Steps
1 From the front, insert a screwdriver in the opening in the busbar adapter
①
.
The button on the top of the busbar adapter must click upwards.
2 Remove the busbar adapter by first pushing it upwards
②
, and then pulling it forwards
③
.
Dismantling the POM (rear panel mounting)
Remove the four screws that secure the POM to the rear panel. See Panel mounting
(Page 67)
Mounting, connecting and commissioning a POM
1.
Follow the instructions in the following section:
"Mounting a POM4320 power output module (Page 63)"
2.
Follow the instructions in the following section: "Connecting (Page 69)"
3.
Follow the instructions in the following section: "Commissioning (Page 101)"
Summary of Contents for SIPLUS HCS Series
Page 1: ...SIPLUS HCS4200 PROFINET PROFIBUS DP ...
Page 2: ......