Configuration
8.5 Configuration control (option handling)
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006
115
PRONETA
SIEMENS PRONETA PC-based software tool that is provided free-of-charge, which
simplifies the commissioning of PROFINET systems by performing the following tasks:
●
Topology overview that automatically scans PROFINET and displays all connected
components. This overview can be exported in the form of a device list. You have the
option of "Initializing" the components and performing other simple configuration tasks, as
well as comparing the actual configuration with a required configuration.
●
IO check to quickly test the wiring of a plant and the module configuration of the
components. By reading and writing the inputs and outputs, PRONETA makes sure that
the distributed I/O devices with their sensors and actuators are correctly wired.
PRONETA can create test profile templates and store test logs to document the test
results.
●
All tasks can be performed even before a CPU is integrated into the network. Moreover,
since no other engineering tools or hardware are required, PRONETA enables fast and
convenient checking of a plant configuration at an early stage. You can find additional
information on the PRONETA in the Support area
http://support.automation.siemens.com/WW/view/en/67460624
8.5
Configuration control (option handling)
8.5.1
Configuration control
Introduction
Configuration control (option handling) is used to operate various standard machine
configuration levels in one project without changing the configuration or the user program.
Summary of Contents for SIPLUS HCS Series
Page 1: ...SIPLUS HCS4200 PROFINET PROFIBUS DP ...
Page 2: ......
