manualshive.com logo in svg

Siemens SIPROTEC 4 7SD80, Manual

The Siemens SIPROTEC 4 7SD80 user manual is available for free download on our website. Equip yourself with the necessary instructions and guidelines to efficiently operate this innovative product. Access the manual at 88.208.23.73:8080 and make the most of your experience with the Siemens SIPROTEC 4 7SD80.

Share
Download
background image

present and the binary input has been activated. The trip command can be blocked via binary inputs (no.
235.2115 

>$00 BL.TripA

) and (no. 235.2114 

>$00 BLK.TRIP

). The phase-selective blocking of the trip

command is required for interaction with the inrush restraint (see “Interaction with other functions”). The
function's dropout ratio can be set. If the threshold (>-element) is undershot after the pickup, the dropout
time delay will be started. The pickup is maintained during that time, a started trip time delay continues to
count down. If the trip time delay has elapsed while the dropout time delay is still during, the trip command
will only be given if the current threshold is exceeded. The element will only drop out when the dropout time
delay has elapsed. If the time is set to zero, the dropout will be initiated immediately once the threshold is
undershot.

External Trip Commands

The logic diagram does not explicitly depict the external trip commands since their functionality is analogous.
If the binary input is activated for external trip commands (no. 235.2112 

>$00 Dir.TRIP

), it will be logically

treated as threshold overshooting, i.e. once it has been activated, the pickup time delay is started. If the
pickup time delay is set to zero, the pickup condition will be reported immediately starting the trip time delay.
Otherwise, the logic is the same as depicted in 

Figure 2-77

.

Interaction with Other Functions

The flexible protection functions interact with a number of other functions such as the

•

Breaker failure protection:
The breaker failure protection is started automatically if the function initiates a trip. The trip will,
however, only take place if the current criterion is met at this time, i.e. the set minimum current
threshold 3902 

50BF PICKUP

 has been exceeded.

•

With the Automatic Reclosure Function (AR):
The AR cannot be started directly. To cooperate with AR, the trip command of the flexible function must
be linked with the binary input No. 2716 

>79 TRIP 3p

 via CFC. To use an action time, the pickup of the

flexible function must additionally be linked to the binary input No. 2711 

>79 Start

.

•

Fuse-Failure-Monitor (see description at “Blocking Functions”).

•

With inrush restraint:
A direct cooperation with the inrush restraint is not possible. If a flexible function is to be blocked by the
inrush restraint, this blocking must be configured via CFC. Furthermore, please note that the flexible
function must be delayed by at least 20 ms to enable the inrush restraint to pick up reliably before the
flexible function.

•

With the overall device logic:
The pickup indication of the flexible function is included in the general pickup, and the tripping in the
general trip. All functionalities associated with the general pickup and general trip therefore also apply to
the flexible function.

Setting Notes

The setting of the functional scope determines the number of flexible protection functions to be used (see
Section 

2.1.1 Functional Scope

). If a flexible function in the functional scope is disabled (by removing the

checkmark), this will result in losing all settings and configurations of this function or its settings will be reset
to their default settings.

General

In the DIGSI setting dialog “General”, parameter In the DIGSI setting dialog „General“, parameter 

FLEXIBLE

FUNC.

 can be set to 

OFF

, 

ON

 or 

Alarm Only

. If the function is enabled in operational mode Alarm Only, no

faults are recorded, no „Effective“-indication is generated, no trip command issued and neither will the circuit-
breaker protection be affected. Therefore, this operational mode is preferred when a flexible function is not
required to operate as a protection function. Furthermore, the 

OPERRAT. MODE

 can be configured.

2.15.2

Functions
2.15 Flexible Protection Functions

170

SIPROTEC 4, 7SD80, Manual

E50417-G1100-C474-A2, Edition 02.2018

Summary of Contents for SIPROTEC 4 7SD80

































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SIPROTEC 4 7SD80

SurgeX SX1115RL Installation Instructions preview
SX1115RL
Brand: SurgeX Pages: 2
Tripp Lite AG-00BA Owner'S Manual preview
AG-00BA
Brand: Tripp Lite Pages: 68
Pacific Power Source AMX Series Operation Manual preview
AMX Series
Brand: Pacific Power Source Pages: 114
EasyFocus SGR-UPS5011 User Manual preview
SGR-UPS5011
Brand: EasyFocus Pages: 4
HP 16A Quickspecs preview
16A
Brand: HP Pages: 7
HP 252663-B24 - PDU Power Distribution Strip Installation Instructions Manual preview
252663-B24 - PDU Power Distribution Strip
Brand: HP Pages: 8
HP H5M54A Installation Manual preview
H5M54A
Brand: HP Pages: 19
National Instruments RMX-10050 User Manual preview
RMX-10050
Brand: National Instruments Pages: 10
B&K IR80 User Manual preview
IR80
Brand: B&K Pages: 2
Tripp Lite PDUMV20HVNET Specification Sheet preview
PDUMV20HVNET
Brand: Tripp Lite Pages: 4
Tripp Lite PDUMNH30HV Quick Manual preview
PDUMNH30HV
Brand: Tripp Lite Pages: 4
Sterling Power Products Pro Protect Manual preview
Pro Protect
Brand: Sterling Power Products Pages: 2
Ormazabal CMS-17 General Instructions Manual preview
CMS-17
Brand: Ormazabal Pages: 24
MGE UPS Systems 12 kVA Startup Manual preview
12 kVA
Brand: MGE UPS Systems Pages: 14
LifeSafety Power NetPower NPE130 Installation Manual preview
NetPower NPE130
Brand: LifeSafety Power Pages: 6
Geist RCM-O Instruction Manual preview
RCM-O
Brand: Geist Pages: 82

Brands by name

Popular brands

Load more brands