3*
)NSTALLATION INSTRUCTIONS
6
# ' #
4HE LOGICAL FUNCTIONS ARE ALSO PROVIDED WITH FUNCTION
NUMBERS WHICH ARE EQUALLY LISTED IN THE TABLES )F THE
FUNCTION NUMBER IS KNOWN THIS CAN BE INPUT DIRECTLY
ON THE SELECTION LEVEL 0AGING THROUGH THE POSSIBLE
FUNCTIONS IS THEN SUPERFLUOUS 7ITH DIRECT INPUT OF THE
FUNCTION NUMBER LEADING ZEROS NEED NOT BE ENTERED
!FTER INPUT OF THE FUNCTION NUMBER USE
THE ENTER KEY
%
)MMEDIATELY THE ASSOCIATED IDENTIFICATION OF THE
FUNCTION APPEARS FOR CHECKING PURPOSES 4HIS CAN
BE ALTERED EITHER BY ENTERING A DIFFERENT FUNCTION
NUMBER OR BY PAGING THROUGH THE POSSIBLE FUNC
TIONS FORWARDS WITH THE .O KEY
.
OR BACKWARDS
WITH THE BACKSPACE KEY
2
)F THE FUNCTION HAS BEEN
CHANGED ANOTHER CONFIRMATION IS NECESSARY WITH
THE ENTER KEY %
4HE BACKSPACE KEY
2
IS USED TO CHANGE BACK TO THE
MENU -!23(!,,).' ! NEW SELECTION CAN BE
MADE IN ORDER TO ALLOCATE DIFFERENT INPUTOUTPUT UNITS
4HE MARSHALLING PROCEDURE CAN BE ENDED AT ANY
TIME BY THE KEY COMBINATION
& %
IE DEPRESSING THE
FUNCTION KEY
&
FOLLOWED BY THE ENTRY KEY
%
4HE DIS
PLAY SHOWS THE QUESTION 3!6% .%7 3%44).'3
#ONFIRM WITH THE 9ES KEY
*9
THAT THE NEW ALLOCA
TIONS SHALL BECOME VALID NOW )F YOU PRESS THE
.O KEY
.
INSTEAD CODE WORD OPERATION WILL BE
ABORTED IE ALL ALTERATIONS WHICH HAVE BEEN
CHANGED SINCE THE LAST CODE WORD ENTRY ARE LOST
4HUS ERRONEOUS ALTERATIONS CAN BE MADE INEFFEC
TIVE
)F ONE TRIES TO LEAVE THE SETTING RANGE FOR THE CONFIGU
RATION BLOCKS IE ADDRESS BLOCKS TO BY JUMP
ING BACK TO THE MAIN MENU /0%2!4)/. -%.5 BY
PRESSING THE BACKSPACE KEY
2
OR THE
-%.5
KEY
THE DISPLAY SHOWS THE QUESTION %.$ /& #/$%
7/2$ /0%2!4)/. 0RESS THE .O KEY
.
TO
CONTINUE MARSHALLING )F YOU PRESS THE 9ES KEY
*
9
INSTEAD ANOTHER QUESTION APPEARS 3!6% .%7
3%44).'3 .OW YOU CAN CONFIRM WITH
*9
OR
ABORT WITH
.
AS ABOVE
7HEN ONE EXITS THE MARSHALLING PROGRAM THE ALTERED
PARAMETERS WHICH UNTIL THEN HAVE BEEN STORED IN
VOLATILE MEMORY ARE THEN PERMANENTLY SECURED IN
%%02/-S AND PROTECTED AGAINST POWER OUTAGE
4HE PROCESSOR SYSTEM WILL RESET AND RE START $UR
ING RE START THE DEVICE IS NOT OPERATIONAL
)N THE FOLLOWING PARAGRAPHS ALLOCATION POSSIBILITIES
FOR BINARY INPUTS BINARY OUTPUTS AND ,%$ INDICATORS
ARE GIVEN 4HE ARROWS
m n
OR KEY IDENTIFIERS AT THE LEFT
HAND SIDE OF THE DISPLAY BOX INDICATE PAGING FROM
BLOCK TO BLOCK WITHIN THE BLOCK OR ON THE SELECTION
LEVEL 4HE CHARACTER & BEFORE THE ARROW INDICATES THAT
THE FUNCTION KEY
&
MUST BE PRESSED BEFORE PUSHING
THE ARROW KEY
m
4HE FUNCTION NUMBERS AND DESIGNATIONS ARE LISTED
COMPLETELY IN !PPENDIX &
www
. ElectricalPartManuals
. com
