Messages and diagnosis
8.7 Performing diagnostics of the 3RW50 soft starter with the 3RW5 HMI High Feature
SIRIUS 3RW50 soft starter
174
Manual, 09/2019, A5E35628455002A/RS-AA/001
8.7
Performing diagnostics of the 3RW50 soft starter with the
3RW5 HMI High Feature
Requirements
●
3RW5 HMI High Feature
Menu: "Diagnosis > Soft Starter"
Parameter
Diagnostic value
Comment
Diagnosis state
Shows all active warnings and faults.
You can acknowledge errors here (manual RESET).
Device state
Type of connection
If the 3RW50 soft starter is supplied with main voltage and a motor is
connected, the type of connection is automatically detected.
•
Type of motor connection unknown
•
Type of motor connection inline
Rotation direction
•
Unknown main power direction
(direction of phase rotation of the power system at terminals L1/L2/L3
not detected)
•
Clockwise
•
Counter-clockw.
Ready (automatic)
Motor CW
Starting mode active
Stopping mode active
Cooling time active
Current limiting active
Input control
Input 1
Maximum pointer reset
CPU/Master STOP
Automatic mode
Operating mode manual - bus
Operating mode manual - local
Main power rotation right
Main power rotation left
Output 1 active
Output 2 active
Output 3 active
Ready to start for motor ON
Thermal motor model deactivated
