Siemens SIRIUS 3RW50 Manual Download

Page: 51 / 238

SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001

Mounting and dismantling

3.1

Installing 3RW50 soft starters

Procedure

Mount the 3RW50 soft starter on a level surface. (Page 53)

Ensure that the permissible temperature range and the necessary distances are complied

with.
Technical data in Siemens Industry Online Support (Page 193)

Optionally mount the fan cover. (Page 52)

Connect the HMI connecting cable to the 3RW50 soft starter and optionally secure the

3RW5 HMI Standard or High Feature in the cabinet door or on a level surface.
–

Connect the HMI connecting cable to the 3RW50 soft starter (Page 55).

–

Installing the Standard 3RW5 HMI into the control cabinet door (Page 56).

–

Installing the High Feature 3RW5 HMI in the control cabinet door (Page 58).

–

Installing the Standard 3RW5 HMI on a flat surface (Page 62).

–

Installing the High Feature 3RW5 HMI on a flat surface (Page 63).

Optionally attach the 3RW5 communication module to a level surface.

You will find more details in the equipment manual for the 3RW5 communication module

in question.

Result

The 3RW50 soft starter is now mounted and ready for connection.

Summary of Contents for SIRIUS 3RW50















































































































































































































































Search results

Summary of Contents for SIRIUS 3RW50

Reviews:

Related manuals for SIRIUS 3RW50

Brands by name

Popular brands

Siemens SIRIUS 3RW50, Manual

Search results

Summary of Contents for SIRIUS 3RW50

Reviews:

Related manuals for SIRIUS 3RW50

Brands by name

Popular brands