Configuration
55
Siemens Building Technologies
Fire Safety & Security Products
03.2007
Actions 1
The DVR can be set to react to video loss differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector,
sound the DVR’s internal buzzer, notify a number of different devices, and/or move
PTZ cameras to preset positions.
1.
Highlight the box under the
Record
heading and press the
button.
Î
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the
DVR detects video loss on the selected camera, it starts recording video from
all the associated cameras.
NOTE
For the
Record
action, the camera you select should be set to the Event or Time & Event recording
mode in the
Record Schedule
setup screen.
2.
Highlight the box under the
Alarm-Out
heading and press the
button.
Î
A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects video loss on the selected camera, it will trigger output
signals on all the associated Alarm-Out connectors. You can also have the
DVR’s internal buzzer sound if video is lost on the selected camera.
NOTE
For the
Alarm-Out
action, the alarm output and beep you select should be set to the Event mode in
the
Alarm-Out
setup screen (
Schedule
tab).
3.
Highlight the box under the
Notify
heading and press the
button.
You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the button.
4.
Highlight
OK
and press the button to accept your changes.
NOTE
For the
Notify
action, the notify item you select should be enabled in the
Notification
setup screen
and the DVR should be registered in the RAS (Remote Administration System).
Fig. 55
Video Loss Actions 2 screen
