Installation
32
Siemens Building Technologies
Fire Safety & Security Products
02.2009
Connections
Signal SISTORE
unit
9-pin Sub-D socket
CKA4820
9-pin Sub-D plug
A (Rx/Tx +)
2
5
B (Rx/Tx -)
3
9
GND 5
6
CKA4820 interface configuration
z
Protocol: SIMATRIX RS232 or SIEMENS IVM
z
Baud rate: 9600
z
Parity: None
If you want to connect the CKA4820 control panel to a SISTORE via the internal COM1A interface,
install the RS-232C/RS-485 interface converter into the connection line. See Section
107H
8.4.1
108H
Connecting
control panel CKA4810.
8.4.2.2 SISTORE Remote View
Fig. 16
T
SISTORE RemoteView
T
–
T
CKA4820 system overview
For a more detailed description of the connections please refer to Section
109H
6
110H
Description of SISTORE
MX / MX DVD or Section
111H
7
112H
Description of SISTORE MX 3G / MX 3G DVD.
Prerequisite:
z
The CKA driver is installed and the icon
is displayed in the task bar. See
Section
113H
9.3
114H
Subsequent installation of software components.
1.
Connect the CKA4820 control panel to the client PC (see
115H
Fig. 16).
2.
Configure the COM1A connection on the control panel for use as an RS232
interface.
Further information on this can be found in the instruction manual for the
control panel.
3.
Start the SISTORE RemoteView application software.
4.
Switch to configuration mode.
5.
Select the
System
tab.
