Technical data
6.2 Output
SITOP PSU100C
Operating Instructions, 06.2013, C98130-A7599-A1-2-7629
29
6.2
Output
6EP1321-5BA00
(12 V/2 A)
6EP1322-5BA10
(12 V/6.5 A)
6EP1331-5BA00
(24 V/0.6 A)
6EP1331-5BA10
(24 V/1.3 A)
Output
Regulated, isolated DC voltage
Rated voltage value Ua rated DC
12 V
12 V
24 V
24 V
Total tolerance, static ±
3 %
3 %
3 %
3 %
Static line regulation, approx.
0.1 %
0.1 %
0.1 %
0.1 %
Static load regulation, approx.
0.2 %
0.2 %
0.2 %
0.2 %
Residual ripple peak-peak, max.
200 mV
200 mV
200 mV
200 mV
Residual ripple peak-peak, typ.
40 mV
80 mV
40 mV
25 mV
Spikes peak-peak, max.
(bandwidth, approx. 20 MHz)
300 mV
300 mV
300 mV
300 mV
Spikes peak-peak, typ.
(bandwidth, approx. 20 MHz)
50 mV
80 mV
20 mV
20 mV
Setting range
10.5...12.9 V
10.5...12.9 V
-
22.2…26.4 V
Product function / output voltage
can be adjusted
Yes
Yes
No
Yes
Setting the output voltage
using a
potentiometer
using a
potentiometer
-
using a
potentiometer
Operating display
LED green for output voltage OK
Response when switching on/off
Overshoot of Ua
approx. 5 %
Overshoot of Ua
approx. 1 %
Overshoot of Ua
approx. 5 %
Overshoot of Ua
approx. 5 %
Starting delay, max.
0.6 s
1 s
1 s
0.6 s
Voltage rise, typ.
10 ms
500 ms
25 ms
90 ms
Rated current Ia rated
2 A
6.5 A
0.6 A
1.3 A
Current range
Remark
0…2 A
2 A to +55° C,
1.1 A to +70° C
0…6.5 A
6.5 A to +50° C,
1.95 A to +70° C
0…0.6 A
0.6 A to +55° C,
0.3 A to +70° C
0…1.3 A
1.3 A to +55° C,
0.7 A to +70° C
Output active power / typical
24 W
78 W
14 W
30 W
Short-time overload current / for a
short circuit in operation / typical
4.8 A
14 A
1 A
3.1 A
Can be connected in parallel to
increase the power rating
Remark
Yes
Power-up only with
single rated load
Yes
Power-up only with
single rated load
No
Yes
Power-up only with
single rated load
Number of devices that can be
connected in parallel to increase
the power rating, units
2
2
-
2
Output characteristic
See Figure 6-3 12 V output characteristic
(Page 31)
See Figure 6-4 24 V output characteristic
(Page 31)
