FEC920: USER GUIDE
Page 22
A
September 18
5.3.2.1 User menu
If the Auditor feature is enabled, up to 25 additional user accounts are available with configurable access
permissions and passwords. If one of these users are logged in, the ‘Configuration’ menu option is replaced by
a ‘User’ menu option which provides the ability for the user to change their password and set the Archive Interval
(if the user has appropriate permissions).
Operating the scroll key whilst the ‘User’ item is highlighted, displays the individual user account menu, as
shown in the following figure. The menu title matches that of the username used to log in.
Figure 11 User menu
Password
Allows the user to change their password (up to a maximum of 20 characters). The
minimum password length can be configured using the Min Password Len parameter in
the Security menu (see Section 6.1.6).
Archive Rate
Allows the user to specify the frequency at which the contents of the flash memory are
archived to the USB port, or via FTP to a PC. Scrollable settings are:
None:
Automatic archiving is disabled. Any archiving must be initiated by the user
using Demand Archiving.
Minute:
Archive is initiated on the minute, every minute.
Hourly:
Archive is initiated at 00:00 each day.
Weekly:
Archive is initiated at midnight every Sunday.
Monthly:
Archive is initiated at 00:00 on the 1st of every month.
Automatic.
The recorder selects the least frequent of the above archive periods which is
guaranteed not to lose data as a result of the internal flash memory running
out of space.
This field is editable if the logged in user has appropriate permissions to adjust the archive
interval (see Section 6.1.11). For further information on archiving, refer to Section 6.2.2.
**********
None
Password
Archive Rate
User account 12
A5E45696052A Rev-AA
