FEC920: USER GUIDE
Page 35
A
September 18
Page two contains the IP address of the Modbus master and of any slaves connected to it, together with some
diagnostic information, as described in ‘Ping Details’, below.
Figure 25 Modbus Master display pages
Page symbol
Modbus Master
Chan 1 Tmp
Chan 2 Tmp
VChannel 1 PV
VChanne 2 PV
VChannel 3 Input
Any Channel alarm
Dig In 1
198.3
200.3
2.0
-20.0
122
Active
Off
Connection
status
Parameter status
Read/Write
Parameters
and values
Modbus Master
FEC920
123.123.123.123
26684
1
Ping...
FEC920
123.123.123.120
3rd Party
123.123.123.124
0
0
Ping...
Modbus Master
Chan 1 Tmp
Chan 2 Tmp
VChannel 1 PV
VChanne 2 PV
VChannel 3 Input
Any Channel alarm
Dig In 1
195.6
199.7
4.1
-23.9
13
Active
Off
The list of parameters can be scrolled through using the up/
down arrows. Values being read by the master are read only,
but the user may enter values for parameters being written by
the master, by highlighting the relevant item and using the
scroll key to enter edit mode.
The use of the Page key causes a return to be made to the
initial Modbus Master display.
A5E45696052A Rev-AA