background image

en 

Safety

6

WARNING ‒ Risk of injury!

Hinges move when opening and closing the appliance door
and can cause injury.

If built-under or integrable appliances are not in a cavity so
that one side is accessible, the hinge area must be covered
at the side. Covers are available from Customer Service or
specialist outlets.

WARNING ‒ Risk of tipping!

Improper installation may cause the appliance to tip up.

Only install built-under or integrable appliances under a
continuous worktop that is securely connected to adjacent
cabinets.

Safe use

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for
use on packagings of detergent and rinse aid products may
cause serious harm to health.

Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

¡

Adding solvents to the interior of the appliance may cause ex-
plosions.

Never add solvents to the interior of the appliance.

¡

Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.

Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of ex-
tractor hoods or aluminium pans), e.g. for the Machine Care
programme.

Summary of Contents for SL63HX61CE

























































Reviews: