background image

en 

Troubleshooting

48

Fault

Cause

Troubleshooting

Coloured deposits (yellow,
orange, brown) that are easy
to remove are present inside
the appliance (mainly at the
bottom).

The formation of films is due
to ingredients of food rem-
nants and tap water (limes-
cale) "soaplike".

1.

Check the setting of the water
softening system.

2.

Add special salt.

→ 

"Adding special salt", Page 24

3.

If you are using combined deter-
gents (tabs), activate the water
softening system.
Follow the information about deter-
gents. 

→ 

"Information on detergents",

Page 28

Plastic parts inside the appli-
ance are discoloured.

Plastic parts inside the appli-
ance may become discol-
oured during the life of the
dishwasher.

Discolouration can come about and
will not impair functioning of the ap-
pliance.

Plastic parts are discol-
oured.

Washing temperature is too
low.

Select a programme with a higher
washing temperature. 

→ 

"Programmes", Page 17

Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.

Only remove large remnants of food
and do not prerinse tableware.

Removable streaks are
present on glasses, glass-
ware with a metallic appear-
ance and cutlery.

Amount of rinse aid to be
dispensed is set too high.

Set the rinse aid system to a lower
setting.

No rinse aid has been ad-
ded.

→ 

"Adding rinse aid", Page 25

Detergent residue is present
in the final rinse. Lid of the
detergent dispenser is
blocked by tableware items
and will not open fully.

1.

Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware. 

→ 

"Arrange tableware", Page 30

Items of tableware are blocking the
dispenser lid.

2.

Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.

Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.

Only remove large remnants of food
and do not prerinse tableware.

Summary of Contents for SN23HW00BD





























































Reviews: