Home Connect
NL
activated and you can start the device
at any time with a mobile end device.
software update
With this function you can update the
software of the device, e.g. for
optimizations, correction of errors or
for security-relevant updates.
The Home Connect app informs you
about available software updates.
Remote Start
activate
If you have set "rc1" in the basic
settings of this function, you activate
the function on your device.
Conditions
†The device is connected to the WLAN
home network connected.
†The appliance is connected to the Home Con-
net app connected.
†In the "Basic settings"
Page 37this function is set to
"rc1".
†A program has been selected.
Protection of personal data
Please observe the information
regarding the protection of personal
data.
When your appliance is connected to a
home network connected to the
Internet for the first time, it transmits
the following categories of data to the
Home Connect server (first
registration):
†Unambiguous identification of the device
ready (consisting of device keys
and the MAC address of the built-
in
Wi-Fi communication module). †
Wi-Fi . Security Certificate
communication module (for
information security of the
connection).
†The current software and hardware
version of your home appliance. †
Status of any previous
reset to factory settings.
▶
impressions.
When you open the appliance door,
the function is automatically
deactivated. aButton is lit.
Tip:To deactivate the function on
to press.
Remote diagnosis
Customer service can access your
appliance via remote diagnosis if you
contact customer service with the
appropriate request, if your appliance
is connected to the Home Connect
server and if the remote diagnosis is
available in the country in which you
use the appliance .
Tip:More information as well as
directions on the availability of
remote diagnostics in your country
can be found in the service/support
section of the local website:
www.home-connect.com
During the first registration, the use of
the Home Connect functions is
prepared. This registration only needs
to be done when you want to use the
Home Connect functionalities for the
first time.
NotePlease note that the Home
Connect functionalities can only be
used in combination with the Home
Connect app. information
39