background image

Basic settings

 en

35

Basic settings

Basic settings

Basic settings

You can configure the basic settings for your appliance to meet your needs.

Overview of basic settings

The basic settings depend on the features of your appliance.

Basic setting

Display text

Selection

Description

Water hardness

H04 

1

H00 - H07

Set the water softening system to
your water hardness.

→ 

"Setting the water softening sys-

tem", Page 25

Level H00 switches the water soften-
ing system off.

Rinse aid dispensing

r05  

1

r00 - r06

Set the amount of rinse aid to be dis-
pensed. 

→ 

"Setting the amount of rinse aid",

Page 28

Switch the rinse aid system off with
level r00.

Intensive drying

d00 

1

d00 - d01

The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.

Note: 

Not suitable for delicate items

of tableware.
Switch Extra Dry on "d01" or off
"d00".

Hot water

A00 

1

A00 - A01

Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".

1

Factory setting (may vary according to model)

Summary of Contents for SN43HW88CS

































































Reviews: