Home Connect
NL
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Connect device to WLAN home
network (Wi-Fi)
Conditions
†The Home Connect app is on the
mobile terminal installed.
†Wifi on the router is activated. †The
basic Wi-Fi setting is on the
device activated.
†The appliance has
cation reception of the WLAN
home network (Wi-Fi).
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
NoteObserve the safety instructions in
these operating instructions and
ensure that they are also observed
when you operate the appliance via
the Home Connect app.
1.
Scan the QR code using the Home
Connect app.
Quick start with Home
Connect
Connect the device quickly and easily
to a mobile end device.
2.
Follow the instructions of the
Home Connect app.
Install app
1.
Install the Home Connect app on
your mobile terminal device.
Home Connect settings
Adapt Home Connect to your needs.
You will find the Home Connect settings
in the basic settings of your appliance.
Which settings the display shows
depends on whether Home Connect is
installed and whether the appliance is
connected to the home network.
2.
Start the app and configure access
for Home Connect.
The Home Connect app guides you
through the entire registration process.
Remote Start
You can start the appliance with your
mobile terminal device via the Home
Connect app.
Tip:If you are in the "Basic Settings"
Page 38of this function is set to
"rc2", the function is permanently
39
Summary of Contents for SN53HS60AE
Page 63: ......