background image

en 

Detergent

30

2.

Add rinse aid up to the max mark.

max

3.

If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.

4.

Close the lid of the dispenser for
rinse aid.

a

The lid clicks into position.

Setting the amount of rinse
aid

If there are streaks or water marks on
tableware, change the amount of
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows H:xx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r:05.

4.

Press   or   repeatedly until the
right amount of rinse aid has been
set.
– A low setting adds less rinse aid

during the wash cycle and re-
duces streaking on tableware.

– A higher setting adds more

rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.

5.

To save the settings, press

 for 3 seconds.

Switching the rinse aid sys-
tem off

If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.

Tip: 

The function of rinse aid is lim-

ited with combined detergents. You
will generally get better results using
rinse aid.

1.

Press  ⁠.

2.

To open the basic settings, press

 for 3 seconds.

a

The display shows H:xx.

a

The display shows 

⁠.

3.

Press 

 repeatedly until

the display shows the value set at
the factory r:05.

4.

Press   or   repeatedly until the
display shows r:00.

5.

To save the settings, press

 for 3 seconds.

a

The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.

Detergent

Detergent

Detergent

Find out which detergents are suit-
able for your appliance.

Suitable detergents

Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
"Special salt" → 

Page 28

 and "Rinse

aid" → 

Page 29

 separately.

Summary of Contents for SN55ZS49CE

































































Reviews: