background image

Safety

 en

7

¡

Highly caustic alkaline or highly acidic cleaning agents in con-
junction with aluminium parts in the interior of the appliance
may cause explosions.

Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in
conjunction with aluminium parts (e.g. grease filters of ex-
tractor hoods or aluminium pans), e.g. for the Machine Care
programme.

WARNING ‒ Risk of injury!

¡

Leaving the appliance door open may result in injury.

Only open the appliance door to load or unload tableware
in order to prevent accidents, e.g. through tripping.

Do not sit or stand on the appliance door when open.

¡

Knives and utensils with sharp points can cause injuries.

Arrange knives and utensils with sharp points in the cutlery
basket with the points downwards, on the knife shelf or in
the cutlery drawer.

WARNING ‒ Risk of scalding!

If you open the appliance door while the programme is run-
ning, hot water may splash out of the appliance.

Open the appliance door carefully if the programme is still
running.

WARNING ‒ Risk of tipping!

Overfilling the Baskets may cause the appliance to tip up.

Never overfill the Baskets with free-standing appliances.

WARNING ‒ Risk of electric shock!

¡

An ingress of moisture can cause an electric shock.

Only use the appliance in enclosed spaces.

Never expose the appliance to intense heat or humidity.

Do not use steam- or high-pressure cleaners to clean the
appliance.

Summary of Contents for SN55ZS49CE

































































Reviews: