background image

Troubleshooting

 en

53

Fault

Cause

Troubleshooting

Stubborn white coatings are
present on tableware, inside
the appliance or the door.

Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.

Change your "detergent"

→ 

Page 31

.

Clean the appliance mechanically.

The hardness range is set in-
correctly or the water hard-
ness is greater than 62 °E
(8,9 mmol/l).

Set the Water softening system to
the water hardness or add special
salt.

3in1/organic/eco detergent
is not effective enough.

Set the Water softening system to
the water hardness and use separ-
ate detergents (proprietary deter-
gent, special salt, rinse aid).

Too little detergent is being
used.

Increase the amount of detergent
used or change "Detergent "

→ 

Page 31

.

Washing programme selec-
ted too weak.

Select a more intensive washing
programme. 

→ 

"Programmes", Page 19

Adjust the sensitivity of the sensors. 

→ 

"Sensors", Page 12

Tea residue or lipstick marks
on tableware.

Washing temperature is too
low.

Select a programme with a higher
washing temperature. 

→ 

"Programmes", Page 19

Too little detergent is being
used or is unsuitable.

Use a suitable "Detergent "

→ 

Page 31

 and follow the manufac-

turer's instructions for the amount
to be used.

Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.

Only remove large remnants of food
and do not prerinse tableware.

Adjust the sensitivity of the sensors. 

→ 

"Sensors", Page 12

Coloured coatings (blue, yel-
low, brown) that are difficult
or impossible to remove are
present inside the appliance
or on stainless steel table-
ware.

The formation of films is due
to substances contained in
vegetables (cabbage, celery,
potatoes, noodles, etc.) or
tap water (manganese).

Clean the appliance.
You can remove deposits with
"Mechanical cleaning" 

→ 

Page 42

or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.

The formation of films is due
to metal components on sil-
ver or aluminium tableware.

Clean the appliance.

Summary of Contents for SN57YS01CE

































































Reviews: