background image

Environmental protection and saving energy

 en

11

¡

Unsuitable cleaning agents may
damage the appliance.

Do not use a steam cleaner.

So as not to scratch the finish
on the appliance, do not use
sponges with a rough surface or
abrasive cleaning agents.

To prevent corrosion, do not use
sponge cloths on dishwashers
with a stainless steel front or
rinse such cloths thoroughly
several times before using them
for the first time.

Environmental protection and saving energy

Environmental protection
and saving energy

Environmental protection and saving energy

Disposing of packaging

The packaging materials are environ-
mentally compatible and can be re-
cycled.

Sort the individual components by
type and dispose of them separ-
ately.

Saving energy

If you follow these instructions, your
appliance will use less electricity and
less water.

Use the Eco 50 ° programme.

The Eco 50 ° programme is en-
ergy-efficient and environmentally
friendly. 
→ 

"Programmes", Page 18

If you do not have much tableware to
wash, use the additional Half Load
function.

1

The programme will adjust to a
lower load and consumption will
be reduced. 
→ 

"Additional functions", Page 19

AquaSensor

The AquaSensor is an optical meas-
uring device (light barrier) which
measures the turbidity of the rinsing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
high, the rinsing water is drained off
and replaced with fresh water. If the
soiling level is lower, the rinsing wa-
ter is used in the next wash cycle, so
reducing water consumption by 3-6
litres. In the automatic programmes
the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.

Installation and connection

Installation and connec-
tion

Installation and connection

To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.

1

Depending on the appliance specifications

Summary of Contents for SN61HX08VE





























































Reviews: