Basic operation
en
31
Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
1.
To prevent water dripping on the
tableware, unload it starting at the
bottom and working up.
2.
Check the washing tank and ac-
cessories for soiling and clean if
necessary.
→
Basic operation
Basic operation
Basic operation
Opening appliance door
▶
Open the appliance door.
Switching on the appliance
▶
Press .
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶
Press the programme button re-
peatedly until the right programme
has been selected.
→
a
The programme is set and the LED
flashes.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:
The additional functions which
can be used depend on the pro-
gramme selected.
→
▶
Press the button for the relevant
additional function.
→
"Additional functions", Page 18
a
The additional function is set and
the additional function button
flashes.
Setting timer programming
1
You can delay the start of the pro-
gramme by 3, 6 or 9 hours.
1.
Press repeatedly until the relev-
ant display lights up.
2.
To activate timer programming,
press
.
Note:
To deactivate timer program-
ming, press repeatedly until none
of the displays 3h, 6h or 9h light up.
1
Depending on the appliance specifications