background image

Troubleshooting

 en

47

Fault

Cause

Troubleshooting

E:32-00 will light up altern-
ately or indicator for water
supply lights up.

The filters in the water con-
nection of the supply or
AquaStop hose are blocked.

1.

Switch off the appliance.

2.

Pull out the mains plug.

3.

Turn off the water tap.

4.

Unscrew the water connection.

5.

Remove the filter from the supply
hose

6.

Clean the filter.

7.

Re-insert the filter in the supply
hose.

8.

Screw the water connection back
on.

9.

Check the water connection for
leaks.

10.

Restore the power supply.

11.

Switch the appliance on.

E:92-40 will light up altern-
ately.

Filters are soiled or blocked.

Clean the filters. 

→ 

"Cleaning filters", Page 43

E:61-03 will light up altern-
ately. Water is not drained.

Wastewater hose is blocked
or kinked.

1.

Reposition the wastewater hose
without kinks.

2.

Remove residues.

Siphon connection is still
sealed.

Check the connection to the siphon
and open if necessary.

Cover of the wastewater
pump is loose.

Secure the cover of the "Wastewa-
ter pump " 

→ 

Page 58

 so it clicks

into position.

E:61-02 will light up altern-
ately.

Wastewater pump is
blocked.

Clean the wastewater pump. 

→ 

"Clean wastewater pump",

Page 58

Cover of the wastewater
pump is loose

Secure the cover of the "Wastewa-
ter pump " 

→ 

Page 58

 so it clicks

into position.

Summary of Contents for SN75Z801BE

































































Reviews: