background image

en 

Troubleshooting

58

Fault

Cause

Troubleshooting

Programme starts automat-
ically.

You did not wait until pro-
gramme ended.

→ 

"Terminate programme",

Page 37

Appliance stops during the
programme or cuts out.

Appliance door is not closed
properly.

Close the appliance door.

Power and/or water supply
has been interrupted.

1.

Check the power supply.

2.

Check the water supply.

Top basket is pressing
against inner door and pre-
venting appliance door from
being closed securely.

Check whether the rear panel of the
appliance is being pressed in by a
socket or hose holder that has not
been removed.

Arrange the tableware so that no
parts project beyond the basket
and prevent the appliance door
from closing properly.

Mechanical damage

Fault

Cause

Troubleshooting

Appliance door cannot be
closed.

Door lock has been activ-
ated.

Close the appliance door with
greater force.

Door cannot be closed due
to installation method.

Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.

Automatic door opening is
not in home position.

Wait for a second after opening the
appliance door.

Lid on the detergent dis-
penser cannot be closed.

Detergent dispenser or lid
are blocked by sticky deter-
gent residue.

Remove detergent residue.

Noise

Fault

Cause

Troubleshooting

Filling valves making knock-
ing noises.

Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.

Can only be remedied in the do-
mestic installation.

Knocking or rattling noise.

Spray arm is striking table-
ware.

Arrange tableware so that the spray
arms do not strike tableware.

Summary of Contents for SN87YX03CE





































































Reviews: