Basic settings
en
39
Basic setting
Display text
Selection
Description
autoOpen Dry
o:02
1
o:00 - o:02
Activate or deactivate automatic
opening of the appliance door during
the drying phase.
The following settings are possible:
¡
With the "o:00" setting, automatic
door opening is deactivated in all
programmes.
¡
With the setting "o:01" automatic
door opening is activated in all
programmes.
¡
With the "o:02" setting, automatic
door opening is only activated in
the Eco 50° programme.
Wi-Fi
Cn:00
1
Cn:00 - Cn:01
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Remote start
rc:01
1
rc:00 - rc:02
Activate or deactivate remote start.
The following settings are possible:
¡
With the "rc:00" setting, remote
start is permanently deactivated.
¡
With the "rc:01" setting, remote
start can be selected via the re-
mote start button.
¡
With the "rc:02" setting, remote
start is permanently activated.
Factory setting
rE:
Start with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Open the appliance door.
2.
Press .
3.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
4.
Press
repeatedly until
the display shows the required set-
ting.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press
for 3 seconds.
7.
Close the appliance door.