NL Set up and connect
s Other documents containing information
tie
s Mounting material
s Steam protection plate
s Salt filling aid funnel
s Power cord
s Quick Guide
Waste water connection
Connect the appliance to a drain water
connection so that the contaminated
washing water can be drained.
Install waste water connection
1.
The necessary steps can be found in
the supplied installation manual.
Setting up and connecting the
device
2.
Connect the drain hose to the
connection nipple of the siphon
using the supplied parts.
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to
the adjacent cupboards. .
3.
Make sure that the drain hose is
not kinked, crushed or tangled.
4.
Make sure that the water does not
flow out by a sealing cap in the
waste water connection.
Drinking water connection
1. "
Observe the safety instructions."
Connect the device to a drinking
water connection.
2. "
Observe the instructions for the
Install drinking water connection
Note
3.
Check the contents of the package
and the condition of the device.
s When you replace the device,
you can use a new water supply
hose.
4.
The required installation dimensions can be found
in the installation instructions.
1.
The necessary steps can be found in
the supplied installation manual.
5.
Level the appliance using the
adjustable feet.
2.
Connect the device to the
drinking water connection using
the enclosed parts.
Pay attention to a firm stand.
6. "
Page 12
7. "
Page 12
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
8.
Connect the device to the
power.
12
