NL Cleaning and maintenance
If the Machine Cleaning indicator on
the control panel lights up or the
display prompts you to do so, carry
out Machine Cleaning without any
dishes. After you have performed
Machine Cleaning, the indicator will
go out. If the device does not have a
reminder function, we recommend
that you perform the machine
cleaning every 2 months.
3.
Place the machine care product in
the interior of the machine.
Only use machine care products
especially suitable for dishwashers.
4.
Pour the machine cleaner into the
detergent dispenser until it is
completely filled.
Do not put any additional machine
cleaner into the interior of the
device.
Perform machine cleaning
If the Machine Cleaning indicator on
the control panel lights up or the
display prompts you to do so, run the
Machine Cleaning programme.
5.
6.
impressions.
impressions.
a Machine cleaning is in progress.
a Once the program is complete,
the machine cleaning indicator
goes out.
Remarks
s Run the Machine cleaning program
went out without any crockery.
s Use only for dishwashing
suitable machine care products
and machine cleaners.
s Make sure that there are no aluminum
um objects, such as grease filters from
extractor hoods or aluminum pans, are
in the washing compartment of the
appliance.
s If you do not complete the Machine Cleaning
If you carry out 3 washing cycles, the
indicator for Machine cleaning goes out
automatically.
s In order to obtain the optimum cleaning performance
To obtain this, pay attention to the
correct placement of the cleaners.
s Take the safety precautions
on the packaging of machine care
products and machine cleaners.
Sieving System
The sieve system filters coarse
impurities from the rinsing circuit.
3
2
1
1
2
3
microsieve
fine sieve
coarse sieve
Cleaning sieves
1.
Remove coarse soiling in the
interior with a damp cloth.
Contaminants from the wash water
can clog the sieves.
2.
Clean the seven.
1.
After each wash, check the sieves
for food residues.
38