Before using for the first time
en
25
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→
Requirement:
been installed and connected."
→
1.
2.
3.
4.
"Setting the water softening sys-
tem." →
5.
"Set the amount of rinse aid to be
dispensed." →
Tip:
You can change these settings
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E
Hardness range
mmol/l
Setting value
0 - 8
Soft
0 - 1.1
H:00
9 - 10
Soft
1.2 - 1.4
H:01
11 - 12
Medium
1.5 - 1.8
H:02
13 - 15
Medium
1.9 - 2.1
H:03
16 - 20
Medium
2.2 - 2.9
H:04
21 - 26
Hard
3.0 - 3.7
H:05
27 - 38
Hard
3.8 - 5.4
H:06
39 - 62
Hard
5.5 - 8.9
H:07
