10
Siemens
A6V11739247_en--_a
Smart Infrastructure
2020-10-08
Maintenance
The SSA911.01TH is maintenance free.
The actuator and the Smart Thermostat will indicate when replacing the batteries is required
approximately 2 months before the batteries are completely empty and the actuator switches
off.
Replacing the batteries
To replace the batteries, the SSA911.01TH should remain mounted on the radiator valve
and the Smart Thermostat should remain on power and switched on. Replacing the batteries
does not require any tools. For optimal performance, the use of high performance alkaline
batteries is recommended.
1. Remove the batteries
– Open the white battery cover [1]
– Remove the metallic slider [2]
– Take the batteries out [3]
2. Insert new batteries - 2 x LR6 (Alkaline AA) [4]
3. Re-insert the metallic slider [5] and put the white battery cover back on [6]
a
The actuator will automatically start a new calibration and after successful calibration will
automatically re-establish the connection to the Smart Thermostat
Unsuccessful pairing or calibration is indicated by an error code on the display (see Error
codes [➙ 9]).
Disposal
The device is considered an electronic device for disposal in accordance
with the European Guidelines and may not be disposed of as domestic
garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
● Dispose of empty batteries in designated collection points.
