8
Siemens
A6V11739247_en--_a
Smart Infrastructure
2020-10-08
Operation
HMI
The interface consists of an LCD display [1] and one push
button [2].
During normal operation, the display is switched off in order
to conserve energy and ensure a long battery life.
Display
Function
Description
THREAD Communication
Blinks during pairing mode with Smart Thermostat
Valve adaptation
Shown during adaptation of the actuator to the radiator valve
Confirmation / acknowledgment Confirms a positive result after any successful operation
Low battery status
Shown when status information feature is activated if the battery
is low
Connection test
Shown for 30 s while a connection test is performed
The ID of the connected device will be shown on the RDS110.R
display
Key lock
Shown when pressing the button if key lock mode is activated
In key lock mode, no manipulation on the actuator is possible.
Error
Shown with error code when an error has occurred
Disappears when normal status has been reached again
Factory reset
Shown during a factory reset process
Setpoint temperature
Temperature unit
Interactive symbols shown during pairing, adaptation and factory reset functions:
● no: appears after choosing function
–
short button press (< 1 s) exits the function, turns the display off and sends the actuator
to sleep mode
–
long button press (> 2 s) confirms the chosen function
● yes: appears after confirming the function (except during factory reset)
● Go: indicates the confirmed function is starting
