background image

en 

Installation and connection

12

litres. In the automatic programmes
the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.

Sensors

The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings. 
→ 

"Changing basic settings",

Page 38

Sensor setting

Description

Standard

Optimum setting for a
mixed load and heavily
soiled tableware. Saves
both energy and water.

Sensitive

Adjusts the programme
strength for effective re-
moval of food remnants
even with low soiling
levels. Energy and water
consumption are adjusted
accordingly.

Very sensitive

Adjusts the programme
strength for difficult condi-
tions of use, e.g. stubborn
dried-on food remnants.
Recommended setting
when using organic or eco-
logical detergents contain-
ing low levels of active
agents. Energy and water
consumption are adjusted
accordingly.

Installation and connection

Installation and connec-
tion

Installation and connection

To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.

Note: 

The appliance has been tested

at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:

¡

Dishwasher

¡

Operating instructions

¡

Installation Instructions

¡

Further information documents

¡

Installation material

¡

Steam guard plate

¡

Salt filling aid funnel

¡

Mains cable

¡

Quick reference guide

Installing and connecting the
appliance

You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or

Summary of Contents for SX67Z800BE

































































Reviews: