en
Basic settings
36
Basic settings
Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Selection
Description
Time setting
00:00 - 24:00
Set the current time.
The setting depends on the time format selected.
Time format
12 h
24 h
1
Set the time format.
Time display
In hours
Time
1
Set the time display for the end of the pro-
gramme.
"Finish in" shows the remaining time the pro-
gramme has to run, e.g. 3h 25min.
"Finish at" shows the time when the programme
will end, e.g. 15:20 hours.
Sprache/Language
See selection on the
appliance.
Select the menu language.
Water hardness
0 - 62
16 - 20 medium
1
Set the water hardness.
"Overview of water hardness settings",
Rinse aid dispenser
0 - 6
5
1
Set or switch off the amount of rinse aid to be dis-
pensed.
"Setting the amount of rinse aid", Page 29
Sensor setting
Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
ExtraDry
on
off
1
Switch "ExtraDry" on or off for each operation.
The temperature is increased during the final
rinse for a better drying result. This may increase
the running time slightly.
Please take care with delicate tableware.
Water connection
Cold water
1
Hot water
Set cold water or hot water connection.
Only set the appliance to hot water if this can be
prepared with little energy and a suitable installa-
tion is available, e.g. solar heating system with
circulation line. The water temperature should be
at least 40 °C and max. 60 °C.
1
Factory setting (may vary according to model)
Summary of Contents for SX67Z800BE
Page 63: ......