background image

en 

Before using for the first time

26

5.

Place the glassZone in the top
basket and lock in position  ⁠.

Check that the mounts are in the
correct position.

a

The glassZone audibly clicks into
position  ⁠.

6.

Push in the top basket.

Basket heights

Set the baskets at the right height.

Appliance height 86.5 cm with cutlery basket

Setting

Top basket

Bottom basket

1 max. ø

24 cm

34 cm

2 max. ø

26.5 cm

30.5 cm

3 max. ø

29 cm

28 cm

Before using for the first time

Before using for the
first time

Before using for the first time

Configure the settings for initial start-
up.

Performing initial start-up

On initial start-up or after a reset to
the factory settings, you will need to
make settings.

Tip: 

Connect your appliance to a mo-

bile device. You can conveniently
change all settings via the

Home Connect app. 
→ 

"Home Connect quick start",

Page 41

Requirement:

 "The appliance has

been installed and connected."
→ 

Page 13

1.

"Add special salt." → 

Page 28

2.

"Add rinse aid." → 

Page 30

3.

Switch on the appliance.

a

The display shows the settings for
initial start-up.

4.

Press   repeatedly until the display
shows the required setting.

Summary of Contents for SX87Y800BE





































































Reviews: