en
Basic operation
36
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶
Press the right programme button.
→
a
The programme is set and the pro-
gramme button flashes.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:
The additional functions which
can be used depend on the pro-
gramme selected.
→
▶
Press the button for the relevant
additional function.
→
"Additional functions", Page 21
a
The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24 hours.
1.
Press .
2.
Press or repeatedly until the
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
by "Finish in" (e.g. 3h 25min) or
"Finish at" (e.g. 15:20 hours). You
can change this setting in the "Ba-
sic settings" →
.
3.
To activate timer programming,
press
.
Note:
To deactivate timer program-
ming, press
for approx.
4 seconds.
Starting the programme
▶
Press
.
a
The programme has ended when
the display shows "Finished".
Notes
¡
If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡
You can only change a pro-
gramme when running if you can-
cel it.
→
¡
The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Open the appliance door carefully.
2.
Press .
a
The programme is saved and the
appliance switches off.