IOM-007
Installation Operation Manual for TC3A-107 and Similar EDUs
Page 4 of 19
1.
INTRODUCTION
This manual details procedures for the following:
Installation Operation and Maintenance of disconnectbale junction box TC3A-107 and similar
EDUs
2.
SCOPE
This manual Includes details of installing a DigiTRON disconnectable junction box and its
associated connecting EFL’s with diver installable connectors.
Electrical and mechanical specification of connectors and hose is also detailed in this document.
The back page includes a sign off point which must be completed by the user of this
manual.
Any information, records or Health and Safety feedback that needs to be detailed can be
recorded in the punch list at the rear of the document.
Sensor installation shall be covered by manufacturer specific procedures.
3.
ABREVIATIONS
A
Ampere
AC
Alternating Current
Assy
Assembly
API
American Petroleum Institute
AWG
American Wire Gauge
BOM
Bill of Material
°C Degree Celsius
CE
Community European
Comms
Communication Signal
CP
Cathodic Protection
DC
Direct Current
DWG
Drawing
EFL
Electrical Flying Leads
FAT
Factory Acceptance Test
IR
Insulation Resistance
ISO
International Organization for Standardization
ITP
Inspection Test Plan
K
Kelvin
LTC
Long Term Cover
M
Metres
Max.
Maximum
MFG
Manufacturer
Min.
Minimum
No.
Number
ROV
Remotely Operated Vehicle
SI
Standard International
SRT
Site Received Test
SST
Stainless Steel
TBD
To Be Defined
TSP
Twisted Screened Pairs
UNS
Unified Numbering System for Metals and Alloys
V
Volt
