Building Technologies
- 19 -
TEL50.GSM
[USER] command examples
SMS command SMS
reply Action
USER USER01=3351234567.1
USER01=3351234567.1
User USER01 set as
Administrator
USER USER02=3471234567.2
USER02=3471234567.2
User USER02 set as
User
USER USER03=3291234567.3
USER03=3291234567.3
User USER03 set as
Notify
USER USER20=3201234567
USER20=3201234567
User 20 set as
Notify
USER USER01
USER01=3351234567.1
queries USER01 position
USER USER05
USER05 deleted
queries USER05 position (no number present)
USER USER01=
USER01 deleted
cancels USER01 position
USER 3351234567=
USERxx deleted
cancels the User number 3351234567 from position xx
The USER numbers entered without extension assume the Notify User (extension.3) default value. There is no limit to the
number of users for each profile. In this section there is a SECURITY parameters that enables control of the incoming call
numbers. When this parameter is enabled (SECURITY=1), only the users in the USER list can interact with the device
according to their profile (administrator, user, notify). A voice call or an SMS message from a number that is not on the USER
list will not receive a reply. The SMS number must be exactly the same as the configured SMS or it will not be recognized.
When the list is empty, in case of activation SECURITY=1, the number used to send this SMS will automatically be inserted as
administrator even in case it has been inserted as user or notify.
[USER]
SMS command SMS
reply Action
USER SECURITY=0
SECURITY=0
Incoming calls filter disabled
USER SECURITY=1
SECURITY=1
Incoming calls filter enabled
USER SECURITY
SECURITY=0 or SECURITY=1
queries status of SECURITY variable
