Settings
en
43
1
Settings
Settings
This appliance has different factory
settings. You can customise the settings
on the appliance.
Note:
If no button is pressed within
90 seconds, the appliance switches to
"Choose beverage" without saving. The
previous setting remains unchanged.
You can select the following settings:
Automatic switch-off
Selecting automatic switch-off
The appliance switches off
automatically at a specific time after the
last button was pressed. This time can
be selected, with settings from
15 minutes to 4 hours possible here.
1.
Simultaneously hold down
%
and
calc’nClean
for at least
3 seconds.
2.
Touch the “
V
” button
cappuccino
repeatedly until "Auto Stand-by"
appears.
3.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
4.
Touch the “
V
” button
cappuccino
and select the time. The following
settings are possible:
–
after 15 min.
–
after 30 min. (factory setting)
–
after 1 hour
–
after 2 hours
–
after 4 hours
5.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
6.
Touch the “
¾
” button
caffe crema
to
exit the menu.
Switching the audible signal
on/off
Whenever a button is pressed, an
audible signal sounds.
This can be switched on or off.
1.
Simultaneously hold down
%
and
calc’nClean
for at least
3 seconds.
2.
Touch the “
V
” button
cappuccino
repeatedly until "Sound" appears.
3.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
4.
Touch the “
V
” button
cappuccino
and select "Sound on" or "Sound
off".
5.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
6.
Touch the “
¾
” button
caffe crema
to
exit the menu.
Setting the language
1.
Simultaneously hold down
%
and
calc’nClean
for at least
3 seconds.
2.
Touch the “
V
” button
cappuccino
repeatedly until "Language" appears.
3.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
4.
Touch the “
V
” button
cappuccino
and select the required language.
5.
Confirm by pressing the “ok” button
latte macchiato
.
The factory settings are activated,
the language selection appears.
6.
Touch the “
¾
” button
caffe crema
to
exit the menu.
Summary of Contents for TI355F09DE
