CAUTION:
The TSM-1X Test Switch Module does not perform all of the required smoke detector tests as
specified in NFPA Standard 72. Please refer to the instructions that accompany the smoke
detector for the complete test requirements.
ELECTRICAL RATINGS
Operating voltage
13 -32 Vdc
Max average current (RMS)
500µA
CONTROL AND INDICATORS
The LED of TSM-1X will mimic the LED of the associated duct detectors or other compatible
intelligent devices. The logic function is setup in the system configuration tool.
The LED flashing rate is shown in the chart below:
Flash Color
Condition
Flash Intervals
(Seconds)
Green
Normal supervisory operation
10
Amber
Device is in trouble
4
Red
Alarm
1
No Flashes
No power or need to be replaced
-
A6V101055486_en--_a
firealarmresources.com
