background image

 

Cyber security disclaimer 
 

Siemens products and solutions provide security functions to ensure the secure operation of building comfort, fire 
safety, security management and physical security systems. The security functions on these products and solutions 
are important components of a comprehensive security concept.  

It is, however, necessary to implement and maintain a comprehensive, state-of-the-art security concept that is 
customized to individual security needs. Such a security concept may result in additional site-specific preventive 
action to ensure that the building comfort, fire safety, security management or physical security system for your site 
are operated in a secure manner. These measures may include, but are not limited to, separating networks, 
physically protecting system components, user awareness programs, defense in depth, etc. 

For additional information on building technology security and our offerings, contact your Siemens sales or project 
department. We strongly recommend customers to follow our security advisories, which provide information on the 
latest security threats, patches and other mitigation measures. 

 http://www.siemens.com/cert/en/cert-security-advisories.htm

 

 

 
 
 
 
FCC Statement 

 

 

WARNING! 

Installation and usage of equipment not in accordance with instructions manual may result in: 

Radiation of radio frequency energy 

Interference to radio communications 

 

Install and use equipment in accordance with instructions manual 

 

Read the following information

 

 

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the 
instructions manual, may cause interference to radio communications. 

It has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which 
are designed to provide reasonable protection against such interference when operated in a commercial environment. 

Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be 
required to take whatever measures may be required to correct the interference. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Siemens Industry, Inc. 

Building Technologies Division 

Florham Park, New Jersey 

Siemens Canada, Ltd. 

1577 North Service Road East 

Oakville, Ontario 

L6H 0H6 Canada 

  

Document ID A6V101055486_en--_a     P/N A5Q00062968 

firealarmresources.com

Summary of Contents for TSM-1X

Page 1: ...ator mode the built in dual isolators will work at both sides of the module to isolate the line short in front or behind the module Observe precautions for handling Electrostatic Sensitive Devices PROGRAMMING 1 Refer to Figure 2 to locate the programming holes on back of the TSM 1X 2 To connect the TSM 1X to the DPU Programmer Tester insert the plug from the DPU cable provided with the Programmer ...

Page 2: ...rovided Refer to Figure 5 NOTES 1 In the device line up to 30 of any compatible devices in polarity insensitive mode with 20 ohms max line resistance can be isolated between two modules in isolator mode in a Class A Style 6 wiring 2 In the device line up to 30 of any compatible devices in polarity insensitive mode with 20 ohms max line resistance can be isolated behind one module in isolator mode ...

Page 3: ...x average current RMS 500µA CONTROL AND INDICATORS The LED of TSM 1X will mimic the LED of the associated duct detectors or other compatible intelligent devices The logic function is setup in the system configuration tool The LED flashing rate is shown in the chart below Flash Color Condition Flash Intervals Seconds Green Normal supervisory operation 10 Amber Device is in trouble 4 Red Alarm 1 No ...

Page 4: ...atest security threats patches and other mitigation measures http www siemens com cert en cert security advisories htm FCC Statement WARNING Installation and usage of equipment not in accordance with instructions manual may result in Radiation of radio frequency energy Interference to radio communications Install and use equipment in accordance with instructions manual Read the following informati...

Reviews: