UTMC OTU/MOVA Handbook
667/HB/31601/000
Page 118
Issue 5
7. Write the Text
GeminiConnection
for the
Computer Name
, Click
Next
8. Select the correct Serial Communications port from the drop down list, Click
Next
9. Select
Anyone's use
, Click
Next
10. Click
Add a shortcut to this connection to my desktop
, Click
Finish
11. For the username and password contact Siemens support.
12. Click
Save this user name and password for the following users
.
13. Select
Anyone who uses this computer
.
14. Click
Properties
15. Select
General
tab. (should also be selected)
16. Under the
Select a device
, click
Configure
17. Change the
Maximum speed (bps)
to 115200
18. Un-click all
Hardware features
, Click
OK
19. Select
Options
tab.
20. Un-Click
Prompt for name and password, certificate, etc.
21. Select
Networking
tab.
22. Select
Internet Protocol (TCP/IP)
23. Click
Properties
24. Click
Advanced
25. Un-Click
Use default gateway on remote network
, Click
OK
on the Advanced
TCP/IP settings window.
26. Click
OK
on the
Internet Protocol (TCP/IP) Properties
Window
27. Click
OK
on the
GeminiConnection Properties
Windows.
28. The Connection will start to dial, Just click
Cancel
B.4 Handset Serial Cable Pinout
The wiring connections for a 9-way (male) to 25-way (female) handset serial cable is
shown below. This cable is used when connecting to the outstation handset port from a
PC.
DB9
(male)
Signal
DB25
(female)
1
-
-
2
RD
3
3
TD
2
4
DTR
20
5
SGND
7
6
DSR
6
7
RTS
4
8
CTS
5
9
-
-
