Unrestricted
16
©
2019 Siemens Industry, Inc.
814205 Rev02
Modem LED and Green WLAN LED. The Red Error LED should not be lit. At times, the Green
Status LED will blink while the others above are solid, this is normal. See below for more
information:
Power (Red)
Status (Green)
Warn (Yellow)
Error (Red)
Description
On
On
On
Off
Powered On
On
Blinking
On
Off
Power on Success
On
Blinking
Blinking
Off
Dialing
On
Blinking
Off
Off
Dialing success
On
Blinking
Blinking
Blinking
Upgrading
On
Blinking
On
Blinking
Reset Success
Signal strength of the SIM card can be confirmed using the table below.
Green LED 1
Green LED 2
Green LED 3
Description
Off
Off
Off
No Signal
On
Off
Off
Weak Signal Strength
On
On
Off
Good Signal Strength
On
On
On
Strong Signal Strength
5.3 SIM Card Setup
The cellular node is preconfigured for the AT&T SIM card included in the router. SIM card
replacement or tampering is not recommended, as it has been specifically configured for this
application.
IMPORTANT:
If the following steps are not completed, service to the SIM card will be cancelled
.
Register the SIM card in this device by emailing support@versichargesg.com the following
information: 1. Serial number(s) of VersiComm(s) that have been purchased (located inside the
front cover of the unit(s)
on the “Rating Label” as seen in the picture below) 2. Address of
installation for VersiComm(s) 3. Company name of purchaser 4. Siemens account number (if
available) 5. Email, phone number, and contact name for future data plan billing purposes.
